EPSON 1220 ERROR

Epson 1220 paper jam error is an error which occurs in the middle of working printer when you are trying to print documents and it will suddenly stop functioning  displaying error message on the screen of your connected computer about the error that paper jam occurred kindly wait for sometime.
So we need to clear the jammed paper which has some precautions and styles of removing the jammed paper in the Epson 1220 paper jam error to be solved for successful functioning of Epson printer.
If paper becomes jammed the print light which is green in color goes off and the error light which is of red color is lit indicating us that error has been occurred.
Precautions to be followed while we clean the jammed paper :
->Remove the jammed paper slowly.
->Do not remove forcefully which might lead to further problems.
->Pull the paper gently so that the whole paper comes out from the printer.
->Make sure that paper type used is as same as paper type setting in printer driver.
There are certain ways like Jam C , Jam E , Jam F which  is explained below :
Jam C :
->Raise the scanner unit.
->Open cover C.
->Raise the two green levers of fuser unit to unlock it.
->Hold the guide up by holding the green tab and pull papers in a gently manner without any further problem.
->Push down the two green levers of fuser unit.
->Close cover C.
->Lower the scanner unit to original position.
Jam E :
->open cover E.
->Gently pull the paper with careful way..-.
->Be careful not to tear the jammed paper.
->Close cover E.
Jam F :
->Raise the cover unit.
->Open cover C , then raise the two green levers of fuser unit to unlock it.
->Open cover E then open cover F.
->gently pull out all the sheets which are jammed inside the printer in a way that there are no more papers inside the cover F.
->Then close the cover F first.
->Then close the cover E.
->Then push down the two green levers on the fuser unit then close cover C.
->Lower the scanner unit to the original position.
JAM MP tray :
->Open the tray and remove the loaded paper.
->Gently pull out the papers from the product which caused trouble while printing of the document.
->Reload the paper and close the MP tray cover.
->Open cover A.
->Check all papers are removed.
->Close cover A.

Comments

Popular posts from this blog

NORTON ERROR 8504 101

Social Media Marketing

ETIHAD AIRWAYS